The Thule tension rafter G2 braces the awning between the cassette and the front rail. It pulls the fabric tight, so wind cannot flap it and rain runs off instead of pooling. Open the awning, drop the rafter in, then wind the fabric back a touch until it locks.
Fit one if you:
- leave the awning out in changeable weather
- need a spare or replacement rafter for your Rain Blocker or Sun Blocker side panels
- have a longer awning and use a third support leg
Key points
- Three mounting versions. Wall awnings, roof awnings and the Omnistor 1200 caravan awning.
- Four projections. 2.00 m, 2.50 m, 2.75 m and 3.00 m.
- Two part for 2.00 m and 2.50 m, three part for 2.75 m and 3.00 m.
- Anodised aluminium with high impact plastic collars and shoe.
- Tool free fitting once assembled with the supplied 5 mm Allen key.
Specification
| Brand | Thule |
| Fits | Thule Omnistor awnings with 2.00 m to 3.00 m projection. Not the 5102, Caravan Style or 2000 |
| Weight | About 2.1 kg (3.00 m roof) |
| Thule part numbers | 307307 wall 2.00 m, 307308 roof 2.00 m, 307309 wall 2.50 m, 307310 roof 2.50 m, 307311 TO 1200 2.50 m, 307312 wall 2.75 m, 307313 roof 3.00 m |
Goes with
Add the Thule additional support leg on awnings over 4.00 m. Rain Blocker G2 sides come with their own rafter. Rafter spares are on the tension rafter spare parts page.
Frequently asked questions
Wall or roof version?
Wall for awnings on the vehicle side, such as the 5200 and 4200. Roof for roof mounted awnings, such as the 6300 and 9200. The 1200 version is only for the Omnistor 1200 caravan awning.
Which projection do I pick?
Match the projection of your awning, not its length. A 2.50 m projection awning takes the 2.50 m rafter.
Do I need one for side panels?
Yes. Thule Rain Blocker and Sun Blocker G2 sides slide into the rafter.









