The Thule hold down side strap kit is the cheapest insurance you can buy for an awning. Two 3 m straps tie the support legs down to the ground, so a gust cannot lift the front profile and damage the fabric or the arms. Fit them every time you wind the awning out.
Use the kit on:
- any Thule Omnistor awning, wall or roof mounted
- Thule HideAway awnings
- Thule Omnistor Caravan Style and 2000
- Thule tents and rooms fitted to the awning
What is in the box
- 2 x 3 m black straps with tensioners
- Supports that clip to the awning legs
- Fixing material
- Storage bag
You need two standard awning pegs, sold separately. On hard standing use Peggy Peg anchor plates or screw in pegs.
How to fit it
- Clip a support to each awning leg, just above the foot.
- Run each strap out at an angle and peg it.
- Pull the tensioner until the strap is tight, not bar tight.
- Check it again after the first hour. New straps settle.
Specification
| Fits | Thule Omnistor and HideAway awnings, Caravan Style, 2000 |
| Straps | 2 x 3 m, black |
| Weight | 1.17 kg |
| Supplied with | Supports, fixings, storage bag |
| Thule part number | 307916 |
Frequently asked questions
Does the kit include pegs?
No. Use standard awning pegs, or anchor plates on hard standing.
Will it hold the awning in a storm?
It stops gusts lifting the awning in normal use. In strong wind, wind the awning in. No awning should stay out in a gale.
Does it fit a roof mounted awning?
Yes. It clips to the support legs, so it fits wall and roof mounted Omnistor awnings alike.
Can I use it with a Thule tent or room?
Yes. Fit the straps outside the tent walls.









